Astrolabe - Lesson 7 & 8

As we are nearing the end of August, I wanted to share the last bit of stitching on the Astrolabe so I can start September with a clean slate. In lesson 7, the empty areas on the yellow felt are stitched.

On the outside portion, the area is filled in with couched Japan gold going around. It looks really pretty but let me tell you my fingers were really sore when I was done. The felt is really thick, so I sometimes had to really push in with a needle. It was better to do this part over multiple sessions. Especially the plunging!

The other half, is my favorite. Using another weight of Japan gold, the thread was braided and couched down to hold the pattern. It was a new technique for me and I really enjoyed stitching it.

It really fills the area quite nicely.

Ta-da! All done! There are areas I'm really happy with and others I wish I'd done better, but I'm really satisfied with it.

Now onto the finishing! In lesson 8, glue is applied to the back of the Rete and Adelaide and left to dry. I did this ahead of time so by the time the embroidery is completed I can just get into the finishing.

The excess fabric is cut away and then with a craft knife, the areas are carefully cut away.

This was fun and frustrating and I had to stop myself at some point as otherwise I would keep trimming. There was always a bit of white that could be cut away.

I have a trick for that. If you find that you can't reach or can't safely trim off the fabric, just take a black marker and color the white. When the entire piece is put together, you won't be able to see the fabric anymore as the black will just blend in.

Here it is all put together. The finishing is done the same way we did on the Mariner's Compass, with a wire going through all three layers and tied down at the back.

With this, the journey ends. It wasn't that long ago since I started the first naval instrument, but it feels like years. The end game was always the Astrolabe. During my trip to Turkey in 2018, I saw an Atsrolabe at the museum and thought that would make an amazing goldwork project. Imagine my surprise when Cythina Jackson posts her goldwork Astrolabe. Using what I learned in this class I hope to stitch it one day. One day... I have a lot of projects I'd like to stitch on my wish list :)

(click on the post to see the video below)

Astrolabe - Lesson 5 & 6

The rest of the lessons on the Astrolabe cover the stitching of the plate and final shape of the casing that would contain it. This is embroidered on black fabric with white cotton fabric for backing. I started with only stretching the white fabric and transfer the design using a chalk pencil.

Once that's done, I stretched the black fabric on top and transferred the lines using running stitch. This is the same technique we had used previously in the Mariner's Compass and Armillary Sphere.

The lines are two weights of gold thread couched down. The circles are made up of couched lizerine.

This is what it looks like by the end of lesson 5. I really love the look of the plate. It would have been really cool if this was a separate layer like a real Astrolabe would have.

For lesson 6, we began the shape of the casing that encloses the plate. To give it a nice rim, we put in a really heavy felt round the plate.

This isn't the thinner felt padding I've previously used in goldwork projects, but a heavier upholstery felt. I used a thinner needle hoping it would make stitching through it easier.

The inner circle line that is drawn in the center of the felt is covered with string padding. Having done this on the Rete, I did a better job at joining the ends.

Much like the Rete, the string padding is covered in cutwork. This time instead of stitching at an angle, it's put in straight down.

I was crossing my finger the entire time I was stitching hoping to get a complete pattern all around but sadly it didn't work out. The pattern is five gold and one black. If I had known in advance, I would have made one or two random grouping four gold and one black, hoping that by the time I got back to the beginning it would make a seamless join. Those random smaller grouping would be less noticeable than what I have right now.

The last step in lesson 6 is to add a wall to the rim. The inside is covered with plate and the outside in crimped plate.

I'm now midway through lesson 7. I'm hoping to get all the embroidery completed by the end of this weekend. If it works out, all that would be left is cutting out all the parts and putting them together for lesson 8. These are things I can do after work.

Astrolabe - Lesson 3 & 4

 In the last update, I had the center of the Rete completed. Now it's time to wrap it.

Around the center of the Rete is a serpent with what looks like flames coming out of it's body. The flames act as arrows when used with the plate.

To give them a more flame like look, there was gold passing that was couched inside.

These were then filled with chipwork.

The serpent's body is made up of chipwork and cutwork. If I though the bright check chips were tiny, the cut pieces of smooth purl were much smaller. It took a long time to get all that space covered.

I did have a happy accident, what looks like an eye for the serpent is actually where I ended my black thread when I was outlining the body.

This completes the Rete. Fun fact, lesson 3 alone took a little over 34 hours to complete.

While I'm writing this, I'm going to throw in lesson 4 which is stitching the Adelaide. Not a process I enjoyed as I'm not a fan of stitching on kid leather. I always end up with bleeding fingers. I really should get myself a proper thimble and learn how to use it.

July TUSAL

As you can see I've been working hard despite my absence. My TUSAL jar is all black and gold and will probably be like that for another month. I just completed lesson 5 (I'm currently behind by one lesson, because it is summer after all), so I have lots to catch you up on. I'll try to post something this week.